Godox Umbrella Octa Softbox 95cm With Grid S-Type Mount

How to use Godox Umbrella Octa Softbox 95cm With Grid S-Type Mount

1. Assemble the Softbox: Begin by assembling the softbox according to the manufacturer's instructions. The softbox should include a reflective inner lining, an outer diffuser panel, and the S-Type mount to attach it to your lighting fixture. Once you have assembled the softbox, you can attach the grid to the front of the diffuser panel.

2. Mount the Softbox: With the softbox fully assembled, you can attach it to your lighting fixture using the S-Type mount. Ensure that the softbox is securely attached to the mount and that the mount is securely attached to the light stand.

3. Position the Softbox: Position the softbox in the desired location for your shoot. It's best to position the softbox at an angle relative to your subject to produce a flattering, three-dimensional effect with the light. You can adjust the position of the softbox and the angle of the light until you achieve the desired look.

4. Adjust the Output: Depending on your lighting needs, you may want to adjust the output of the softbox. You can do this by adjusting the power settings on your lighting fixture or by moving the softbox closer or further away from your subject. Keep in mind that moving the softbox closer to your subject will produce a softer, more diffused light, while moving it further away will produce more directional light.

5. Test and Adjust: Once your softbox is in position and the output is adjusted, take some test shots to see how the light looks on your subject. Make any necessary adjustments to the position or output of the softbox until you achieve the desired look.