The RØDE Stereo VideoMic is a broadcast quality stereo microphone designed for use with camcorders, DSLR cameras and portable audio recorders.
Two high resolution 1/2" condenser capsules are mounted in a fixed X/Y stereo array, providing a very natural stereo recording, while still offering a high level of rear rejection.
The Stereo VideoMic is an ideal microphone for capturing environmental and ambient sounds, as well as live music. For dialogue and directional applications the RØDE VideoMic and VideoMic Pro are recommended.
An in-built shock mounting system isolates the Stereo VideoMic capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.
Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand. (Note that cameras with proprietary sized mounts may require an additional adaptor).
In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
A -10dB level attenuation (or PAD), selectable from the rear face of the microphone, allows recording of loud sound sources, such as live music or motorsport.
The Stereo VideoMic is ideal for use with DSLR cameras such as the Canon 5DMkII, Canon 7D, Canon 1D, Canon 550D/T2i, Canon 60D, Nikon D7000, Nikon D5100, Panasonic GH1 and Panasonic GH2.
The RØDE Stereo VideoMic is covered by RØDE Microphones' industry leading 10 year warranty.
|Frequency Response||40Hz - 20kHz Selectable HPF @ 80Hz / 12dB /octave|
|Dynamic Range||115dB (per IEC651)|
|Signal-to-Noise Ratio||79dB (A-weighted per IEC651)|
|Max Input Sound Level (SPL)||130dB (@ 1kHz. 1% THD into 1 ohm load)|
|Output Connectors||Stereo mini jack - 1/8" (3.5mm) Right Channel - Ring|
|Low Frequency Roll-Off||80Hz / 12dB octave|
|Dimensions||6.85 x 3.93 x 2.51" (172 x 100 x 64mm)|