This useful all in one set contains a Pulsar Tx radio transmitter as well as a Pulsar Rx receiver card and antenna. Together they enable you to banish sync cords and your Bowens Gemini lighting to become wire-free!
The ultra-compact transmitter with its discreet ‘camera-hugging’ low profile ensures that photographers can shoot comfortably without their camera becoming unbalanced by unwieldy attachments.
The Pulsar Tx features a unique new ‘click-lock’ system for attaching the unit to the camera hotshoe securely without the need for further tightening via a thumbscrew. The ‘click-lock’ holds the trigger firmly in place whether the camera is being used in landscape or portrait position – and there is no loss of connection, as with some heavier triggers.
The lightweight Pulsar Tx weighs in at just 34g and is powered by a single CR2032 cell battery, the trigger’s power management system ensures long battery life by making sure that the unit is always in low-power mode until more energy is required.
Functionality couldn’t be easier! The Tx is controlled by just two simple push buttons allowing full control over the 24 radio zones and the test flash function – with no external switches there is nothing to break and nowhere for dust to collect and compromise the unit’s performance. The solid antenna adds to this durability. Channel and studio selections are indicated by a row of LED’s.
By simply plugging a Pulsar Rx radio receiver card into the slot on the back, Gemini lights instantly become compatible with the Pulsar radio trigger system.
Because the radio receiver card becomes an integral part of the unit it is much more reliable than an external receiver which can only be as good as it’s cord connection.
Simply insert the Radio Trigger Card into the slot on the back of the Gemini unit and fit the antenna into the socket on the side and your monolight can now receive signals from a Pulsar Radio Trigger unit mounted onto your camera.
Never be let down by unreliable sync cords or connections again.
NOTE: For this kit to function, your Gemini monolight must have a Pulsar Card slot on the rear control panel.
Compatible Gemini Units:
Gemini Classic 250C
Gemini Classic 500C