The Benro S7 Aluminum Video Tripod Kit is jam packed with features that you actually need. Built for HDSLR cameras with rigs and long lenses or the latest video cameras, the S7 kit supports up to 15.4 lb. Equipped with a 65mm base with a 3/8" thread, this flat base head becomes a versatile creative tool allowing you to remove the 75mm half ball adapter to mount the head separately on sliders, jibs, or monopods. The S7 uses a 501 compatible QR6 plate. Other features include: pan & tilt lock, pan & tilt drag, 4-step counterbalance and illuminated bubble level.
Each S7 Aluminum Video Tripod Kit is based on an eighth-generation design of single leg tubes and flip lever leg lock mechanisms. The tripod itself was made in combination with strategically select cast and machined aluminum and magnesium alloy components. Multi-angle leg locks allow each leg to be positioned independently for quick setup and uneven terrain. The rubber feet can be replaced with a set of stainless-steel spiked feet, which are included. For additional stability there is a weight hook at the bottom of the center column for hanging a camera bag or other weight. S7 Max height = 63.1 in/1605mm Closed length = 30.3 in/770mm.
4-Step Counter Balance
Counter balance will help you counter the weight of your rig or heavy lens. each step provides a different amount of counterbalance: 0 lb. (0kg), 5.0 lb. (2.2 kg), 10.0 lb. (4.5 kg), 15.4 lb. (7.0 kg)
Stainless Steel Spiked feet
Easily swap out the screw-in rubber feet for the stainless steel spiked feet to handle virtually any surface.
65mm Flat base head with 3/8" thread, paired with 75mm half ball adapter
The S7 is equipped with a flat base with a 3/8" thread, allowing you to mount the head separately on sliders, jibs, monopods or half ball adapters. The S7 also uses a 501/504PL compatible QR6 plate.
Both the pan lock and tilt lock can be turned on or off independently and are located on the operator side of the head for easy control. Tilt range for the S7 is +90°/-50°
Flip leg locks
Tripod height can easily be set by a flip of the quick lock leg levers, which combined with anti-rotation legs enable fast and fumble-free set-up.
Heavy Duty Case and Strap
Included for handy transport and protection of the tripod and head.
Adjustable Leg Angles
For an extra measure of flexibility, Benro tripod legs can be independently locked into place at three different angles to enable shooting in cramped quarters, on irregular surface areas, or at ground level.
Continuous Pan Drag
Dial in the perfect amount of tension necessary with the variable pan drag.
5 Year Warranty with Product Registration Register your Benro tripod
|Type||Video Tripod Kits|
|Load Capacity||7 KG|
|Maximum Height||160.5 cm|
|Minimum Height||29.5 cm|
|Head Attachment Fitting||3/8"-16 thread (75mm half ball adapter included)|
|Leg Stages Sections||2 / 3|
|Leg Lock Type||Flip lock|
|Independent Leg Spread||Yes|